Modine® PDP Series Power Vented Gas-Fired Unit Heater
More about Modine® PDP Series Power Vented Gas-Fired Unit Heater
Quick to install and easy to use, the Modine Power Vented Gas Fired Unit PDP Series Heater offers an excellent 83% thermal efficiency. The heater features a totally enclosed motor with thermal overload and intermittent pilot ignition. It has a corrosion-resistant finish and a rotatable power exhauster for horizontal or vertical venting. Ideal for garages, shops and warehouses, the heater includes adjustable louvers, control terminal board, gas controls and fan delay timer. Available in propane or natural gas.
Features & Advantages
- 83% thermal efficiency
- Intermittent pilot ignition (spark ignition) with continuous retry control system
- 100% shut-off if the unit does not light to ensure unburned gases do not build up in the unit
- Propeller unit heater
- Choose from Natural Gas or Propane
- Totally enclosed motor
- 115V/60Hz/1Ph
- Requires only a vent pipe and connections to a gas and electric line for installation
- Fans engineered for quiet operation
- Aluminized steel heat exchanger is standard (stainless steel heat exchanger available by special order)
- Designed for suspended mounting
- Power exhaust can be rotated 180° for horizontal or vertical venting
- Safety pressure switch to ensure safe venting conditions
- CSA certification for commercial and industrial use in the United States and Canada
- Made in the USA
| Model # | BTU Input | BTU Output | Gas Type | Vent Size | Max. Mount | CFM @70° F | Heat Throw | Temp Rise | Dimensions (W x H x D) | Weight |
|---|---|---|---|---|---|---|---|---|---|---|
|
(LP)-PDP150AE0185SBAN (NG)-PDP150AE0130SBAN |
150,000 | 123,000 | LP or NG | 5" | 16' | 2,180 | 55' | 51° | 21" x 35 1/4" x 29 13/16" | 168 lbs |
|
(LP)-PDP175AE0185SBAN (NG)-PDP175AE0130SBAN |
175,000 | 143,500 | LP or NG | 5" | 17' | 2,550 | 59' | 51° | 23 1/2" x 35 1/4" x 29 9/16" | 175 lbs |
|
(LP)-PDP200AE0185SBAN (NG)-PDP200AE0130SBAN |
200,000 | 164,000 | LP or NG | 5" | 15' | 2,870 | 51' | 52° | 25 5/8" x 40 1/4" x 34 3/4" | 239 lbs |
|
(LP)-PDP250AE0185SBAN (NG)-PDP250AE0130SBAN |
250,000 | 205,000 | LP or NG | 6" | 19' | 3,700 | 67' | 50° | 25 5/8" x 40 1/4" x 34 3/4" | 239 lbs |
|
(LP)-PDP300AE0185SBAN (NG)-PDP300AE0130SBAN |
300,000 | 246,000 | LP or NG | 6" | 21' | 4,460 | 74' | 50° | 28 5/8" x 40 1/4" x 34 3/4" | 269 lbs |
|
(LP)-PDP350AE0185SBAN (NG)-PDP350AE0130SBAN |
350,000 | 287,000 | LP or NG | 6" | 20' | 4,870 | 70' | 53° | 33 5/8" x 40 1/4" x 34 11/16" | 338 lbs |
|
(LP)-PDP400AE0185SBAN (NG)-PDP400AE0130SBAN |
400,000 | 328,000 | LP or NG | 6" | 19' | 5,440 | 69' | 54° | 40" x 40 1/4" x 38 3/16" | 418 lbs |
Suspending a Modine PDP Unit: The most common method of suspending Modine Gas Unit Model PDP Heaters is to utilize 3/8” threaded rods. On all PDP units, except sizes 350 and 400, two tapped holes (3/8-16) are located in the top of the unit to receive threaded rods. The 350 and 400 models have four tapped holes in the top of the unit for threaded rods.
Note: When ordering parts for your Modine Heaters, please have the following numbers ready: Model Number, Serial Number, Power Code Number and Control Code. This information can be found on the serial plate on the side of the unit.