Color of the insert mat may vary from photo. 

A must-have for biosecurity, the SaniStride STRIDE Disinfectant Mat System diminishes the spread of germs. The majority of the biohazards carried by footwear are lodged in shoe treads. This wet-mat delivery system is designed to sanitize the treads and bottoms of footwear. This mat allows you to take two shoe bottom disinfecting steps while crossing the mat.

The 1" SaniStride insert is designed for industrial, heavy-foot traffic use. Charge the insert with 1 to 1.5 gallons of sanitizer. Because of the proprietary insert design, there are no waves and little to no splashing, making the SaniStride System one of the best shoe disinfectant boot mats on the market.

The mat saturates shoes with a Quaternary ammonium disinfectant and sanitizer as you walk across it. This kills germs and effectively diminishes the spread of germs by shoe-to-floor contact. When you use this system, the disinfectant soaks the bacteria and viruses compacted in all the small crevices. This soaking will take a minute or so to air dry. That is sufficient time for the disinfectant to be highly effective.

When used as directed, the SaniStride Mat has been lab tested to be 99.99% effective against the spread of MRSA by shoe-to-floor contact.

SaniStride mats have an easy clean-out protocol; simply flush/rinse the insert and base-mat with clean water in a utility sink or with a hose. Stand or hang the insert on-end to drain the water quickly and drip dry overnight. If you need to use the system 24/7, you will want to order a replacement insert, QC Part #250321. This is needed for the cleaning rotation process, as they need to drip dry overnight. Do NOT put the insert in the extractor, washer, or dryer as this will destroy the insert and its inner material.

Uses: Pork & Poultry Facilities, Medical/Lab & Health Care Clinics, Food Processing, Sports Facilities & Locker Rooms, High Technology, Veterinary, Emergency Medical & Fire Service, and more

The SaniStride System

• [1] SaniStride Mat - 39" L x 23" W x 1 1/16" H outer dimensions
• [1] SaniStride Insert - 34" L x 18" W x 1" D
• The full system weighs only 15 lbs
• 2 1/2" wide surround ramps & 1 1/16" total mat height

How To Use: Before charging the mat, the Quat concentrate must be diluted to a disinfectant level. If the Quat disinfectant uses 1 oz. of concentrate to 1 gallon of water, the 1 gallon of concentrate may last for up to a year. Place the mat atop a 4' x 6' drying mat in the desired location. The drying mat will alleviate any slippage of the mat, as well as the person on the mat; this will also protect the flooring under the mat. Insert a SaniStride packet into the mat as well. Insert the long side into the well wall and slowly lower it completely down into the well. Within seconds, it will absorb almost all the sanitizer.

Once a week, clean and recharge the system with fresh Quat. The rubber mat section can be hosed off and wiped dry. The insert pack can be drenched and hosed off, or rinsed in a utility sink and hung to drip dry. Do not use a washer, dryer or extractor, as these will damage the packet.

Made in the USA.