Prevent rusting and further corrosion on metal surfaces with Vanberg Rust Converter Spray. When applied, this protective compound chemically converts rust into a stable black compound. It will also oxidize other corrosion and scale. A clear layer then forms over the converted rust and serves as a stand-alone coating.

This coating may be can be covered with VSC Seam Tape, QC Part #470264.

Applications: Metal roofs, ceilings, and walls on livestock, plant, institutional and farm buildings. It is also effective on equipment, boats, tools, and virtually any metal structure.

Typical Coverage: Variable, typically up to 500 sq. ft. per gallon

Application: Brush, roller, or spray (conventional paint sprayer)

Application Process

• Preparation, remove all debris & loose rust flakes with a wire brush or plastic wheel brush on a drill


• Mixing, shake well


• Application, uniformly apply by brushing, spraying, or rolling product evenly over the rusted surface


• Drying, allow to dry completely (1–2 hours). A clear, hard finish will form & rust will turn black. If any rust is still present, an additional application may be required

4 Steps to Successful Metal Coatings

1. Remove loose rust.


2. Apply VCS Rust Converter, 1 Quart, QC Part #470261, 13 oz. Spray, QC Part #470262 & 1 Gallon, QC Part #470263.


3. Repair with VCS Seam Tape, QC Part #470264.


4. Coat with AMC-100™ Metal Coating, 1 Gallon, QC Part #470255 or 5 Gallon, QC Part #470256.

Available Sizes

• QC Part #470262, 13 oz Aerosol


• QC Part #470261, 1 Quart


• QC Part #470263, 1 Gallon