More about CBM Lighting Industrial 7 Watt LED Bulbs - Non-Dimmable
Designed to handle the harsh environment of livestock facilities, these 7 Watt CBM Lighting Industrial Non-Dimmable LED Bulbs will stop the cycle of replacing bulbs designed for residential locations. Made with shatterproof Lexon housing, a high-quality LED chip and a rubber base gasket, they will stand up to what your barns throw at them.
Advantages
- 7 watt bulb is equivalent to a 100 watt incandescent bulb
- Available in 3000K (warm white) or 5000K (bright white) color
- Non-dimmable
- 100,000 hour bulb life; over 11 years of 24/7 operation
- 5-year manufacturer warranty, 100% replacement of any defective product
- 180 lumens per watt, the highest light output in the industry
- Qualifies for rebate programs - check with local utility for availability
- Quality you can feel, these bulbs are noticeably heavier
- Designed for harsh industrial agricultural environments
- Water-resistant up to 2,500 PSI water pressure
- Corrosion-resistant housing and lens resists pit gases
- High-end components keep consistent lighting as feed and ventilation motors cycle on and off
- LED light and Lexon lens will not change color over time
- Lexon shatterproof housing protects components from external impacts
- Made in Canada
Features
- Lexon Housing
- IP66 rated
- Shatterproof
- Waterproof up to 2,500 PSI
- Will not discolor over time
- Clay-Packed Electronics
- Assists in heat dissipation
- Prevents corrosion of internal components
- Protects connections and components from being damaged from external impact or vibrations from nearby machinery
- High-Quality LED Chip
- 180 lumen per watt output
- Color will not change over time 85-140V operating range allows for full light output during power surge or power reduction as electrical motors turn on and off
- Stainless Steel Base
- Will not corrode over time
- Maintains consistent contact
- Heavy-Duty Capacitor
- Excellent heat resistance
- Allows for over 100,000 hours of life
- Over 11 years of 24/7 continuous operation
- Rubber Base Gasket
- Seals out moisture and keeps electrical connection dry
- Prevents base from vibrating loose when industrial motors or machinery are running nearby
Bulb Maintenance
- While CBM Lighting bulbs and adapters are rated to withstand up to 2,500 PSI water pressure, it is best practice not to subject electrical components to extensive high-pressure water exposure
- It is recommended to keep the end of your high-pressure wand at least 18" from the bulb when cleaning
- Best practice is to dampen bulbs first with a light mist of water to blow off dust and to loosen fly specs, then follow with a final rinse 5-15 minutes later
Base Gasket Installation: When properly installed, the rubber gasket will roll up onto itself as the bulb is screwed into the base, resulting in the outside edges of the gasket pointing away from the screw base. Confirm gasket is sealed evenly around the base of the bulb. If uneven, repeat the process.
Also Available
- QC Part #63490 - CBM Lighting Industrial 7 Watt Non-Dimmable LED Bulbs
- QC Part #63491 - CBM Lighting Industrial 12 Watt Non-Dimmable LED Bulbs