Keep your feet warm and comfortable all day when you wear these black and purple DRYSHOD Artic Storm Women's Hi Boots. They feature layers of warmth in a slim profile to hug your feet.

Features

• DS1 molded outsole - outer & inner grip
• 6 layers of protection plus EVA cold-blocking midsole = 7 layers
• 5.5 mm bootie, 2.5 mm DENSOPRENE® XD foam (extreme density) for extra protection, 2 mm air mesh & 2 mm warm fleece lining = 11 mm of insulating warmth & protection
• Removable molded EVA sock liner
• Double Achilles heel & instep reinforcement for comfort & protection
• Nylon shank
• 100% Waterproof Designed & built to be 100% waterproof from top to bottom
• 5mm DESOPRENE® Foam Insulated Bootie Keeps out the cold & wet. Keeps in warm & dry
• HYDROKOTE® Water-Repellent No more soggy boots. Water roils off & dries in seconds
• 4-Way Stretch Breathable Airmesh Lining Moves the air to keep your feet dry & comfortable
• Easy On/Off 4-way stretch materials & generous heel kick for easy on/off convenience
• Roll-Down Calf Pipe Roll down the top to tuck in your pant leg or vent in warm temperatures
• Genuine Natural Rubber Overlays Only genuine hand-laid rubber. No PVC, PU, or TPR
• Superior Stability Reinforced tuck board with rigid shanks for added stability
• Superior Fit & Comfort Slipper-soft comfort & sized to athletic-shoe standards
• Convenient Back-Pull Tabs Sturdy pull tabs for easy on/off convenience & safety

About the DS1Outsole This is a premium two-piece sole with a high-traction molded-rubber outsole and comfortable cold-blocking EVA-sponge midsole designed for outdoor use. The outsole is made of natural rubber and features an inner set lugs of designed for maximum any-angle grip and flex, while the outer lugs are designed for maximum lateral/medial support and wear. The spacing of the lugs and slight radius at the bottom of each lug helps to release and minimize the build-up of mud and debris on the outsole during use.

The toe bumper is designed to rise above the toe line to protect the toes and provide support to the entire toe box of the boot. The rear bumper is designed with a large rigid “kick spur” for easy-off convenience, plus rises above the heel bone (calcaneus) to provide maximum protection and support to the entire heel area. Lastly, the sole is designed with a wide base in the forefoot and heel to provide greater support and stability on a variety of rough terrains. The Haymaker’s non-pigmented gum rubber formula sole is slightly softer and more grippy on wet or dry surfaces. It also has a higher content of natural rubber, making it naturally more resistant to barnyard elements such as urine and manure.

• Form-fit sock liner
• Reinforced tuck board
• Rigid Shank
• Cold-blocking EVA midsole
• Aggressive all-terrain outsole w/toe bumper

About DESOPRENE Foam Insulated Bootie Super dense neoprene material that keeps the cold/wet out and the warm/dry in. This waterproof and self-insulating foam is naturally lightweight, buoyant, and very comfortable – your foot and lower leg stay warm and protected in cold and wet conditions. In fact, they are constructed with the same material as deep-water dry suits. Dryshod materials exceed the long-term effectiveness of waterproof membrane materials and provide greater insulating properties per volume than fine-layered substrates.

• Keeps out the cold and wet – keeps in the warm & the dry
• Self-insulating & waterproof
• Acts as a neutral medium between inside/outside temperatures
• Naturally lightweight, BUOYANT & very comfortable
• Material keeps foot & lower leg warm & protected
• Flexible 4-way stretch

About HYDROKOTE Water-Repellent The textile cover on the entire bootie is treated with a nano-scale hydrophobic coating that repels water and mud on contact. This keeps the textile exterior surface of the boot from icing up in freezing temps and from retaining water in the fibers in wet conditions.

• No more soggy boots. Textile is treated with a nano-scale hydrophobic coating that repels water & mud on contact
• Water rolls off the nylon outer & dries in seconds keeping the exterior textile from icing up & from retaining water in the fibers in wet conditions
• Keeps boots dry

About Breathable 4-Way Airmesh Lining Airmesh is what keeps high-end running shoes cool and dry under intense use. Structured-airmesh has a top layer and a bottom layer that is held apart by thousands of tiny vertical fibers. As you walk, air is pushed and circulated through the vertical fibers allowing the skin to breathe thus keeping the boot dry and humidity-free within the boot’s specified comfort range. Dryshod boot linings are non-abrasive and hypoallergenic.

• Provides superior comfort & breathability by wicking away humidity & perspiration
• Made up of thousands of tiny vertical fibers that allow the air to circulate throughout the interior lining surfaces
• As you walk, air is pushed and circulated through the vertical fibers allowing the skin to breathe – keeping the boot dry & humidity-free
• Nonabrasive & hypoallergenic