When safety, steel-toe protection, and all-day comfort matter on the job site, reach for DRYSHOD Steel-Toe Max Cold Conditions Protective Boots. They are made with extra layers of protection for unsurpassed warmth on the coldest days.

Features

sDRYSHOD Steel-Toe Max Cold Conditions Protective Bootss
• Solid rubber, long-wearing outsole for traction & durability
• Special broad-toe last – 3 mm extra space
• ANSI-rated steel toe for safety Meets ASTM F2413-11 M I/75 C/75 EH
• Rigid triple-layer toe & heel reinforcements
• Yellow treatments to indicate safety
• 6 layers of protection plus EVA cold-blocking midsole = 7 layers
• 5.5 mm bootie + 2.5 mm DENSOPRENE XD foam (extreme density) for extra protection + 2 mm airmesh + 2 mm warm fleece lining = 11 mm of insulating warmth & protection
• Removable molded EVA sockliner
• Double achilles heel & instep reinforcement for comfort & protection
• Features unisex sizing
• Steel shank for added arch support
• 100% Waterproof Designed & built to be 100% waterproof from top to bottom
• 5mm DESOPRENE® Foam Insulated Bootie Keeps out the cold & wet. Keeps in warm & dry
• HYDROKOTE® Water-Repellent No more soggy boots. Water roils off & dries in seconds
• 4-Way Stretch Breathable Airmesh Lining Moves the air to keep your feet dry & comfortable
• Easy On/Off 4-way stretch materials & generous heel kick for easy on/off convenience
• Roll-Down Calf Pipe Roll down the top to tuck in your pant leg or vent in warm temperatures
• Genuine Natural Rubber Overlays Only genuine hand-laid rubber. No PVC, PU, or TPR
• Superior Stability Reinforced tuck board with rigid shanks for added stability
• Superior Fit & Comfort Slipper-soft comfort & sized to athletic-shoe standards
• Convenient Back-Pull Tabs Sturdy pull tabs for easy on/off convenience & safety

About the Rubber + EVA Combo Outsole This sole unit is designed with a molded solid-rubber outsole and buffed slab-EVA midsole. The EVA midsole provides weight relief and comfort to the heel and mid-foot, while the rubber under the toe area is solid to provide crush-resistant support to the steel-toe cap above. The lugs are designed for long wear while the center spine provides excellent lateral and medial flex. This sole is made of compression-molded natural rubber and is oil resistant.

About HYDROKOTE Water-Repellent The textile cover on the entire bootie is treated with a nano-scale hydrophobic coating that repels water and mud on contact. This keeps the textile exterior surface of the boot from icing up in freezing temps and from retaining water in the fibers in wet conditions.

• No more soggy boots. Textile is treated with a nano-scale hydrophobic coating that repels water & mud on contact
• Water rolls off the nylon outer & dries in seconds keeping the exterior textile from icing up & from retaining water in the fibers in wet conditions
• Keeps boots dry

About Breathable 4-Way Airmesh Lining Airmesh is what keeps high-end running shoes cool and dry under intense use. Structured-airmesh has a top layer and a bottom layer that is held apart by thousands of tiny vertical fibers. As you walk, air is pushed and circulated through the vertical fibers allowing the skin to breathe thus keeping the boot dry and humidity-free within the boot’s specified comfort range. Dryshod boot linings are non-abrasive and hypoallergenic.

• Provides superior comfort & breathability by wicking away humidity & perspiration
• Made up of thousands of tiny vertical fibers that allow the air to circulate throughout the interior lining surfaces
• As you walk, air is pushed and circulated through the vertical fibers allowing the skin to breathe – keeping the boot dry & humidity-free
• Nonabrasive & hypoallergenic