Acid-A-Foam EVO is a phosphate-free, acidic foaming cleaner, used to remove detergent residues, mineral scale and other hard-to-remove elements. Alternating between a good alkaline detergent and a good acid-based detergent maximizes surface cleanliness and prepares the surface for the second step of disinfection. Acid-A-Foam EVO removes dirt, grime, protein, and oils as well as minerals and adherent films.

Features & Benefits

• Phosphate-free formulation
• Ideal acidic cleaner for a pH rotation program
• Removes mineral scale, detergent residues and other elements left behind after repetitive use of alkaline cleaners
• Formulated using biodegradable detergents
• Superior foaming capabilities
• Compatible with all Neogen disinfectants

Directions for use:

• As a General-Purpose Cleaner for Walls, Floors, Feed Pails, Waterers, and Equipment: Use Acid-A-Foam EVO as a 0.75% to 2.5% solution (1 to 3 fl. oz. per gal. of water) (8 to 24 mL/L). Vary the amount depending on the soil load and how difficult the surface is to clean. Acid-A-Foam EVO may be used through high-pressure cleaning equipment, foaming devices, steam cleaners, or it may be used manually with a cloth, sponge, or brush. After cleaning, rinse away soils with fresh water, or wipe off with a clean sponge.
• For Food-Processing Equipment, Utensils, and Other Food Contact Surfaces: Clean as above. Thoroughly rinse cleaned surfaces with potable water before they reuse. Where recommended or permitted, apply a sanitizer solution to food contact surfaces before reuse.
• For Barn Cleaning: Use a 0.25% to 0.5% solution of Acid-A-Foam EVO (1 gal. per 300 to 400 gal. of wash water) (1L/300 - 400L) for cleaning. Apply to surfaces and, if possible, let stand for 10 to 15 minutes before thoroughly rinsing all surfaces with clean water at high-pressure. After a thorough cleaning, let surfaces dry as much as possible, and then follow-up with an appropriate disinfecting solution.