1 2
Pentair

Pentair Booster Pump

QC Part #110210 | MFR # HP10E
$961 99
$961 99
Sale Sold out
Pentair Booster Pumps.
HP
Ships within 2 Business Days

View full details
Description
Reviews
Q&A
Documents

More about Pentair Booster Pump

Pentair Booster Pump. Avaialble with or without a cord.

Features/Advantages

  • Stainless steel shaft and wear rings
  • Cast iron suction and discharge housing
  • High pressure seals with o-ring construction for positive sealing
  • Hose and nozzle kits available
  • Precision molded, high impact thermax impellers and diffuser stages fitted with stainless steel wear rings
  • 3/4" inlet x 3/4" outlet
  • Dual voltage, open drip proof standard motor

Applications

  • Residential, Commercial or Agricultural Pressure Washing
  • Filtration and Reverse Osmosis
  • Booster and Spray Systems
  • HVAC
  • General Purpose Pumping
  • Car Wash
QC Part # Model # HP Phase Stages Pipe Tapping Inlet Pipe Tapping Outlet Motor Voltage Max Inlet Pressure Max Working Pressure Dimensions Weight
110205 7HBP75 3/4 1 12 3/4" 3/4" 115/230 80 PSI 315 PSI 27.4" L x 6.5" W x 9.75" H 48 lbs.
110210 10HBP100 1 1 10 3/4" 3/4" 115/230 80 PSI 315 PSI 27.8" L x 6.5" W x 9.75" H 50 lbs.

Additional Specifications:

  • The 3/4 HP model adds 120 PSI to the intake pressure at 8 GPM; 140 PSI at 6 GPM
  • The 1 HP model adds 120 PSI to the intake pressure at 9.5 GPM; 150 PSI at 8 GPM

Note: Do not run pump dry, a weeping type nozzle must be used!!
Filter by rating

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike
good product I would buy it again.

I had a larger aermotor that served me well for 12 years.the contractor over spec it and so it ran at 220 psi. I have a low producing well and so the booster pump was restricted to 2 gal/min. So it ran hot and the motor finally burnt up. I speced this smaller pump using a topo map and it pumps up to my stock easily at 140 psi.the old pump had a lot of sand go through it from the well and that never seem to hurt it.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike
good product I would buy it again.

I had a larger aermotor that served me well for 12 years.the contractor over spec it and so it ran at 220 psi. I have a low producing well and so the booster pump was restricted to 2 gal/min. So it ran hot and the motor finally burnt up. I speced this smaller pump using a topo map and it pumps up to my stock easily at 140 psi.the old pump had a lot of sand go through it from the well and that never seem to hurt it.

There are no file attachments for this product.
Products you've viewed