Rectorseal Gene 404L is an All-Purpose Clear Solvent Cement is a regular body polyvinyl chloride (PVC) solvent cement used for joining PVC pipe & socket-type fittings, & for joining ABS to PVC transition pipe & socket-type fittings. Max VOC per SCAQMD 1168/316A or BAAQMD Method 40: 510 g/l.

Features & Benefits

• LEED compliant and NSF-approved for potable water
• 3-year shelf life
• UPC (IAPMO) listed
• Faster setting regular body formula is ideal where makeup time is at a premium on smaller diameter pipe
• Exceeds ASTM D 2564 specifications

Instructions:

• 1. Store and apply between 40˚F and 110˚F. Protect from freezing. Do not thin or use if cement has become curdled, lumpy or thickened.
• 2. Wear non-permeable gloves during application to avoid skin contact.
• 3. Clean fitting socket and pipe, and check for proper fit. Apply PRIMER to all PVC surfaces. While still wet, quickly begin solvent cement application.
• 4. Shake well before using and stir frequently while using. Apply with supplied dauber applicator. For pipe greater than 2" in diameter, use a natural-bristle brush sized 1/2 of the pipe diameter.
• 5. Apply a thin coat evenly to the socket. Avoid puddling. Quickly apply a heavy coat to the pipe end. While wet, quickly insert the pipe into the fitting with a slight twisting movement until it bottoms out.
• 6. Hold the pipe into the fitting for at least 30 seconds to prevent pipe from backing out.
• 7. Wipe excess cement from the joint with a rag. Allow 15 minutes before handling. Avoid full-line pressure for 24 hours. Cure times vary with size, fit, temperature, and humidity